Demountable Transformer Kit

Item Code: SA742

Description :

Inspire have redesigned the classic demonstration apparatus to address the safety issues in the conventional apparatus. The conventional design always had the chance to generate lethal voltage if a wrong primary -secondary combination of coils were used. Using the purpose-designed power supply, no voltage greater than 25V ac can be experienced in whatever cobination of primary - secondary coils the user selects. Also, the wings of the specially designed coils prevent any wrong combination to generate high secondary voltage. The 25 V ac output terminal of the power supply cannot be connected across the ordinary coils to make step-up or step-down trnasformer and hence safe. Only specially designed coils with special connectors joins to the 25V ac terminal.




  • AC induction: Dependence of Induced Voltage On Coil Core.
  • Relationship between Transformer Input And Output Voltage Waveforms.
  • Dependence of Transformer Output Voltage on The Turns Ratio of the Transformer.
  • Variation of Transformer Primary Current with Secondary Current.
  • Transformer Efficiency and its Dependence on Load.
  • Moving Iron Meter Model.
  • Determination of Coil Induction.
  • Half-wave Rectification
  • Full-wave Rectification with Centre-tapped Transformer.
  • Full-wave Rectification with Diode-bridged Transformer.
  • To Produce a Low Voltage but Higher Current to Melt a Nail.
  • Demonstration of Induction Furnace.
  • Demonstration of Thomson’s Jumping Ring Experiment.
  • Demonstration of Eddy Current Braking.
  • Demonstration of Shaded Pole Induction Motor.

Cat No

Item Name

Qty.

C15048 Clamp base 1
C15043 300 Turns’ Coil 1
C15044 600 Turns’ coil 2
C15045 900 Turns’ coil 1
C15047 1800 Turns’ coil 1
C15046 1200 Turns’ coil with centre-tapping [0 - 600 -1200] 1
SA719 100 Turns’ coil with wings 1
SA720 300 Turns’ coil with wings 1
C8470 U & I Core, section 32X25mm 1
SE067 Multimeter 1
SN200 Connecting Leads 50cm 8
SA722 Demountable Transformer Power Supply 1
CB397 Quadrant Shaped Plane Plate 1
CB398 Quadrant Shaped Slotted Plate 1
CB392 Aluminium Motor Disc 1
CB396 Vertical Support Rod 1
CD1744 Pole Piece 1
C15103 Tightening Screw 1
CB393 Axle with screw 1
C8469 Clamping Plate 1
C5740 Six Turn Copper Coil 1
C5735 Solder Trough 1
C5738 Solid Aluminium Ring 1
C5739 Split Aluminium Ring 1
R7474 Nails 1
C15075 Clamping Screw 1
Instruction Manual 1